Parting out sale

longhorn335 · 02-12-2015, 08:19 PM

BIMMERPOST / Classifieds

Asking Price:

None

Location:

✓ Will Ship

Item Interest

I am starting to part out some of my parts and accesories for my 2008 E92. Some are available immediately and some will be available until april/may timeframe since I will sell my car until the summer:

cobb $450 (previous revision)

P3 vent, P3 / RIX V1 Boost Gauge, $200
SPARKLING GRAPHITE FULL M TECH SWAP, $800 (I can help but you will need to do the swap of bumpers and side

KONI shocks, yellow, full rear and front set. These are new, bought them but didnt get a chance to install them. Link below for reference. $550
http://konimarket.com/products/bmw-e...ock-front-1003
http://konimarket.com/products/bmw-e...hock-rear-1005

brakes, stoptech, red, $3500

intercooler, ETS BMW N54 135i and 335i Intercooler Kit, 5", $450

perf exhaust $900

cone filters $50

also selling 3 vmr v701 19" wheels, see post:

http://www.e90post.com/forums/showth...7#post20265357

set of fog lights - these are for the standard E92 front bumper, not for the mtech - there's a glaze that is normal for this age fog lights - $50

set of chrome grills - good condition - $50

Kayani_1 · 02-12-2015, 10:14 PM

check your pm sent you a message I am local.

Jnicer · 02-13-2015, 07:45 AM

Where are u located I want the mtec front 9179125219

longhorn335 · 02-14-2015, 03:46 PM

PMs replied, located in Houston

I will only sell the mtech front together with the back bumper and side panels

longhorn335 · 07-16-2016, 02:41 AM

I'm reviving this thread since my e92 will finally be sold. All the parts listed above are now for sale. I will be removing the parts that are installed on the car over the weekend and next week and post pictures.

I prefer local sales but can ship especially the smaller lighter stuff.

Young_Man · 07-16-2016, 07:24 AM

Does the P3 gauge work with E90?

longhorn335 · 07-16-2016, 01:08 PM

Quote:

Originally Posted by Young_Man

Does the P3 gauge work with E90?

Yes young man

Tomczyk · 07-16-2016, 02:06 PM

What size intercooler? Condition? Any piks. Please respond pm'd thanks

longhorn335 · 07-16-2016, 03:18 PM

Quote:

Originally Posted by Tomczyk

What size intercooler? Condition? Any piks. Please respond pm'd thanks

Is the 5", bought on 2013, only about 20k miles on it since it is not a daily driver... Planning on removing today so will post pics tonight

It does not come with downpipes only the intercooler and the hoses/fasteners

Tomczyk · 07-16-2016, 08:20 PM

If your selling the kit it should come with the lower chargepipe correct?

longhorn335 · 07-16-2016, 08:28 PM

ok the FMIC is removed now. it was almost as clean as the day I installed it. pictures are just after it came off the car and then I taped the connections to prevent contamination.

all pictured is included and is all you need, FMIC pipe/hoses and clamps.

longhorn335 · 07-16-2016, 08:32 PM

Quote:

Originally Posted by Tomczyk

If your selling the kit it should come with the lower chargepipe correct?

ah that is correct, I misinterpreted your previous question, thought you were asking about exhaust downpipes... yes all the hoses and charge pipe included as pictured.

Tomczyk · 07-16-2016, 08:34 PM

Ill pm you right now thanks

AK. · 07-19-2016, 02:10 AM

You have pics of the BBK's?

longhorn335 · 07-21-2016, 08:50 PM

Quote:

Originally Posted by AK.

You have pics of the BBK's?

done, see edited post above
planning on removing them this weekend or next, will post disassembled pictures then

Nick335e92 · 07-22-2016, 06:20 PM

I pm u sir

Young_Man · 07-22-2016, 09:54 PM

Is the gauge boost only? How hard is install?

Helio324 · 07-23-2016, 12:00 PM

PM sent for KONI yellow shocks

foreignmuscle · 07-23-2016, 05:06 PM

What brand intakes ?

longhorn335 · 07-25-2016, 07:29 PM

Quote:

Originally Posted by Young_Man

Is the gauge boost only? How hard is install?

yes, boost only... not difficult, the "tricky" part that you add a tee to the boost line tubing to add a connection which goes to the gauge... but I would say this diy is easier than most typical diys in this site and it doesn't take long...

longhorn335 · 07-25-2016, 07:34 PM

Quote:

Originally Posted by foreignmuscle

What brand intakes ?

burger motorsports

Nick335e92 · 07-25-2016, 10:52 PM

Ill.take boost gauge text me 4083862754

02-12-2015, 08:19 PM	#1
longhorn335 Private First Class 8 Rep 190 Posts Drives: 08 335i Coupe Join Date: Jul 2010 Location: Houston iTrader: (1)	Parting out sale BIMMERPOST / Classifieds Asking Price: None Location: ✓ Will Ship Item Interest I am starting to part out some of my parts and accesories for my 2008 E92. Some are available immediately and some will be available until april/may timeframe since I will sell my car until the summer: cobb $450 (previous revision) P3 vent, P3 / RIX V1 Boost Gauge, $200 SPARKLING GRAPHITE FULL M TECH SWAP, $800 (I can help but you will need to do the swap of bumpers and side KONI shocks, yellow, full rear and front set. These are new, bought them but didnt get a chance to install them. Link below for reference. $550 http://konimarket.com/products/bmw-e...ock-front-1003 http://konimarket.com/products/bmw-e...hock-rear-1005 brakes, stoptech, red, $3500 intercooler, ETS BMW N54 135i and 335i Intercooler Kit, 5", $450 perf exhaust $900 cone filters $50 also selling 3 vmr v701 19" wheels, see post: http://www.e90post.com/forums/showth...7#post20265357 set of fog lights - these are for the standard E92 front bumper, not for the mtech - there's a glaze that is normal for this age fog lights - $50 set of chrome grills - good condition - $50 __________________ 2008 335i E92 \| Sparkling Graphite \| M-tech \| M3 Lip Spoiler \| Sport Package \| Logic7 \| VMR 19" V701 Gunmetal \| 30% Tinted Windows \| Cobb Tuning \| P3 Boost Gauge Last edited by longhorn335; 07-22-2016 at 01:30 PM..
	Appreciate 0 Tweet Quote

02-12-2015, 10:14 PM	#2
Kayani_1 Lieutenant Colonel 81 Rep 1,656 Posts Drives: BMW E92/E60 Join Date: Oct 2009 Location: Houston iTrader: (1)	check your pm sent you a message I am local. __________________ nickname"BAD 3",MHD E85 tune,RennArt catback non-resonated exhaust,VRSF Downpipes, VRSF 7"FMIC,VRSF stock side inlets,SSQV BOV,ECS CP,M-performance alcantara steering,retrofit M3 paddle shifters,Alpina B3 tranny flash,AFE power seal CAI,LED angels,ST Coilovers,M3 upper/lower control arms,E93 M3 Front Swaybar ,235/35/19x9 ,275/30/19x9.5. M sport bumpers, CF diffuser. When in doubt..flat out.
	Appreciate 0 Quote

02-13-2015, 07:45 AM	#3
Jnicer Private First Class 1 Rep 199 Posts Drives: 2007 335i coupe Join Date: Feb 2012 Location: Boogie down iTrader: (0)	Where are u located I want the mtec front 9179125219
	Appreciate 0 Quote

02-14-2015, 03:46 PM	#4
longhorn335 Private First Class 8 Rep 190 Posts Drives: 08 335i Coupe Join Date: Jul 2010 Location: Houston iTrader: (1)	PMs replied, located in Houston I will only sell the mtech front together with the back bumper and side panels __________________ 2008 335i E92 \| Sparkling Graphite \| M-tech \| M3 Lip Spoiler \| Sport Package \| Logic7 \| VMR 19" V701 Gunmetal \| 30% Tinted Windows \| Cobb Tuning \| P3 Boost Gauge
	Appreciate 0 Quote

07-16-2016, 02:41 AM	#5
longhorn335 Private First Class 8 Rep 190 Posts Drives: 08 335i Coupe Join Date: Jul 2010 Location: Houston iTrader: (1)	I'm reviving this thread since my e92 will finally be sold. All the parts listed above are now for sale. I will be removing the parts that are installed on the car over the weekend and next week and post pictures. I prefer local sales but can ship especially the smaller lighter stuff. __________________ 2008 335i E92 \| Sparkling Graphite \| M-tech \| M3 Lip Spoiler \| Sport Package \| Logic7 \| VMR 19" V701 Gunmetal \| 30% Tinted Windows \| Cobb Tuning \| P3 Boost Gauge
	Appreciate 0 Quote

07-16-2016, 07:24 AM	#6
Young_Man Lieutenant 42 Rep 568 Posts Drives: E90 335i Join Date: Jun 2011 Location: Earth iTrader: (4)	Does the P3 gauge work with E90?
	Appreciate 0 Quote

07-16-2016, 02:06 PM	#8
Tomczyk Private 10 Rep 77 Posts Drives: 2009 BMW 335I E92 Join Date: Mar 2016 Location: Union County iTrader: (4)	What size intercooler? Condition? Any piks. Please respond pm'd thanks
	Appreciate 0 Quote

07-16-2016, 08:20 PM	#10
Tomczyk Private 10 Rep 77 Posts Drives: 2009 BMW 335I E92 Join Date: Mar 2016 Location: Union County iTrader: (4)	Ets intercooler If your selling the kit it should come with the lower chargepipe correct?
	Appreciate 0 Quote

07-16-2016, 08:28 PM	#11
longhorn335 Private First Class 8 Rep 190 Posts Drives: 08 335i Coupe Join Date: Jul 2010 Location: Houston iTrader: (1)	ok the FMIC is removed now. it was almost as clean as the day I installed it. pictures are just after it came off the car and then I taped the connections to prevent contamination. all pictured is included and is all you need, FMIC pipe/hoses and clamps. Attached Images __________________ 2008 335i E92 \| Sparkling Graphite \| M-tech \| M3 Lip Spoiler \| Sport Package \| Logic7 \| VMR 19" V701 Gunmetal \| 30% Tinted Windows \| Cobb Tuning \| P3 Boost Gauge Last edited by longhorn335; 07-21-2016 at 08:49 PM..
	Appreciate 0 Quote

07-16-2016, 08:34 PM	#13
Tomczyk Private 10 Rep 77 Posts Drives: 2009 BMW 335I E92 Join Date: Mar 2016 Location: Union County iTrader: (4)	Im buying Ill pm you right now thanks
	Appreciate 0 Quote

07-19-2016, 02:10 AM	#14
AK. Lieutenant 137 Rep 589 Posts Drives: E90 M3/E92 M3 Join Date: Jan 2015 Location: California iTrader: (3) Garage List 2010 E90 335i [10.00]	You have pics of the BBK's?
	Appreciate 0 Quote

07-22-2016, 06:20 PM	#16
Nick335e92 Second Lieutenant 6 Rep 219 Posts Drives: 2007 BMW 335i coupe Join Date: Feb 2016 Location: San Jose ca 95124 iTrader: (1)	I pm u sir
	Appreciate 0 Quote

07-22-2016, 09:54 PM	#17
Young_Man Lieutenant 42 Rep 568 Posts Drives: E90 335i Join Date: Jun 2011 Location: Earth iTrader: (4)	Is the gauge boost only? How hard is install?
	Appreciate 0 Quote

07-23-2016, 12:00 PM	#18
Helio324 Private 11 Rep 91 Posts Drives: 13' BMW m6, 15' Mercedes S550 Join Date: Jan 2016 Location: Southern CA iTrader: (0)	KONI yellow PM sent for KONI yellow shocks
	Appreciate 0 Quote

07-23-2016, 05:06 PM	#19
foreignmuscle New Member 0 Rep 14 Posts Drives: n54 335i Join Date: Jul 2016 Location: manteca california iTrader: (0)	What brand intakes ?
	Appreciate 0 Quote

07-25-2016, 10:52 PM	#22
Nick335e92 Second Lieutenant 6 Rep 219 Posts Drives: 2007 BMW 335i coupe Join Date: Feb 2016 Location: San Jose ca 95124 iTrader: (1)	Ill.take boost gauge text me 4083862754
	Appreciate 0 Quote