|
Post Reply |
|
Thread Tools | Search this Thread |
10-10-2015, 10:07 AM | #1 |
Captain
329
Rep 984
Posts |
BMW F8X TC Kline Camber Plates Racing F80 F82 M3 M4 3 Hole Caster TCK
http://www.ebay.com/itm/262087158801...witem=&vxp=mtr **SOLD** Up for sale is a set of good used TC Kline Camber Plates for F8X. Have about 3000 miles on them. This is for 3-Bolt Strut Hats (Pre 01/15 Production). No hardware included, this kit re-uses stock strut bolts. The all new F80 F82 M Series has completely re-designed front strut mounting design than any previous BMW. The New F8x M3 M4 Camber Plates are made with an anodized aluminum main plate, and stainless steel bearing housing, stress link mount and fasteners. This is not the cheapest way to make these parts, but TC Kline Racing in only interested in offering the best quality components possible. The camber adjustment holes offer aprox. ¾ degree camber change for each position, from the center, (stock), to 2 ¼ additional degrees adjustment. Caster is also increased 1-2 degrees. These camber plates are designed to work with TC Kline Racing coil-over suspension, stock suspension use OEM or Sport type springs(OEM thrust bearing must be transferred over to the new plates) and any coilovers using stock upper strut mounts. ***For vehicle production date before 1/1/2015 only***
__________________
2009 X5d | 2007 E90 Track | 2002 M3 Track | 1991 535i Track
Last edited by MasterC17; 10-13-2015 at 11:58 AM.. |
10-13-2015, 08:20 AM | #2 |
Captain
329
Rep 984
Posts |
Sale Pending.
__________________
2009 X5d | 2007 E90 Track | 2002 M3 Track | 1991 535i Track
|
Appreciate
0
|
10-13-2015, 11:58 AM | #3 |
Captain
329
Rep 984
Posts |
Sold.
__________________
2009 X5d | 2007 E90 Track | 2002 M3 Track | 1991 535i Track
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|