Atlanta Dyno Day?

scalbert · 11-29-2008, 09:35 PM

I'm planning on heading back to the dyno soon; probably the 2nd or 3rd Saturday in January. Anyone interested in a small meet as well?

I will probably use the shop that is near my house. They were decent to deal with and cost was pretty good.

scalbert · 11-29-2008, 09:37 PM

Sorry, wrong forum, sent request to move.

techforge · 11-29-2008, 09:41 PM

I would - I've been meaning to get mine done for a few months. The only place I've heard of in the area is mainstream performance in powder springs. I spoke with Charles and he said he had done a couple 335's.

scalbert · 11-29-2008, 09:48 PM

Quote:

Originally Posted by techforge

I would - I've been meaning to get mine done for a few months. The only place I've heard of in the area is mainstream performance in powder springs. I spoke with Charles and he said he had done a couple 335's.

I've been to a number of shops over the years; Top Speed, Battlground, Dynolabs and Dynoformance as well as one out near Buford. The last time I was on the rollers was at the shop near my house in Woodstock; North Georgia Speed Shop. They are a single bay shop but the guys work on some decent power cars and were friendly to deal with.

Plus, a place across the street can sell VP Fuels. And did I mention it is two miles from my house and less than a mile from a Summits Tavern.

scalbert · 11-29-2008, 09:51 PM

I should add that if installs are needed/desired, we can organize that if reasonable/ If we can't easily do it at the shop for whatever reason, we can always use my house.

Rugs · 11-29-2008, 10:38 PM

I may be game, keep me posted. Get your DP's & IC Installed?

scalbert · 11-29-2008, 11:07 PM

Quote:

Originally Posted by Rugs

Get your DP's & IC Installed?

IC in, DP's about to be done. Just need to set aside the time which is very difficult this time of year.

wrh3 · 11-29-2008, 11:22 PM

I may be in to, I need to get my DPs in.....

scalbert · 11-29-2008, 11:24 PM

Quote:

Originally Posted by wrh3

I may be in to, I need to get my DPs in.....

If I can use their lift, we might be able to do the DP install there.

wrh3 · 11-29-2008, 11:25 PM

That would be cool and much better than me under the car on ramps.....they are RR V1s

I would be forever in your debt.....

AlpineM6GC · 11-30-2008, 12:47 AM

I'm game too. Scalbert, pm me if it goes down. Danny

scalbert · 11-30-2008, 08:33 AM

Quote:

Originally Posted by wrh3

That would be cool and much better than me under the car on ramps.....they are RR V1s

I would be forever in your debt.....

Let me check with them this week and I will let you know.

scalbert · 11-30-2008, 08:35 AM

Quote:

Originally Posted by atlienkid@hotmail.com

I'm game too. Scalbert, pm me if it goes down. Danny

Sounds good and with the response so far, I'll go ahead and set somethid up. Any preference on the day; January 10th or 17th?

techforge · 11-30-2008, 11:53 AM

Quote:

Originally Posted by scalbert

Sounds good and with the response so far, I'll go ahead and set somethid up. Any preference on the day; January 10th or 17th?

Probably the 17th for me. I never did buy any dp's but I might as well see what my v3 is putting down.

JoosyJoos · 11-30-2008, 01:47 PM

Count me in!!

AlpineM6GC · 11-30-2008, 01:54 PM

The 10th is good for me. 17th I'm working

zenmaster · 11-30-2008, 06:30 PM

I'll be there.

triple35 · 12-24-2008, 07:44 PM

Quote:

Originally Posted by zenmaster

I'll be there.

so did this end up happening ?? let me know if there is another one....

scalbert · 12-24-2008, 08:02 PM

Yes, it will be. Just haven't confirmed the date yet.

scalbert · 12-24-2008, 08:04 PM

It looks like less than ten (counting two others I knwo will come), which is fine. Just want to give the shop an estimate.

triple35 · 12-26-2008, 11:46 AM

if you need a stock 335 for a basline run im in....I'd like to go just to meet some bmw guys in the area.

scalbert · 12-26-2008, 12:52 PM

Quote:

Originally Posted by triple35

if you need a stock 335 for a basline run im in....I'd like to go just to meet some bmw guys in the area.

That would be fantastic.

11-29-2008, 09:35 PM	#1
scalbert Major General 153 Rep 5,780 Posts Drives: '13 S4, '15 Q7 Join Date: Feb 2007 Location: Woodstock, GA iTrader: (8)	Atlanta Dyno Day? I'm planning on heading back to the dyno soon; probably the 2nd or 3rd Saturday in January. Anyone interested in a small meet as well? I will probably use the shop that is near my house. They were decent to deal with and cost was pretty good.
	Appreciate 0 Tweet Quote

11-29-2008, 09:37 PM	#2
scalbert Major General 153 Rep 5,780 Posts Drives: '13 S4, '15 Q7 Join Date: Feb 2007 Location: Woodstock, GA iTrader: (8)	Sorry, wrong forum, sent request to move.
	Appreciate 0 Quote

11-29-2008, 09:41 PM	#3
techforge Lieutenant 26 Rep 577 Posts Drives: 335xi coupe Join Date: Jul 2008 Location: Denver iTrader: (2)	I would - I've been meaning to get mine done for a few months. The only place I've heard of in the area is mainstream performance in powder springs. I spoke with Charles and he said he had done a couple 335's.
	Appreciate 0 Quote

11-29-2008, 09:51 PM	#5
scalbert Major General 153 Rep 5,780 Posts Drives: '13 S4, '15 Q7 Join Date: Feb 2007 Location: Woodstock, GA iTrader: (8)	I should add that if installs are needed/desired, we can organize that if reasonable/ If we can't easily do it at the shop for whatever reason, we can always use my house.
	Appreciate 0 Quote

11-29-2008, 10:38 PM	#6
Rugs Lieutenant 46 Rep 502 Posts Drives: E93 335i Join Date: Jul 2007 Location: Southeast U.S. iTrader: (2)	I may be game, keep me posted. Get your DP's & IC Installed? __________________ "WorldsQuickest 335i E93" SMART-Top /One-Off Opaque Vinyl EYELIDS / 30% TINT / A.C.SCHNITZER Pedals / "M" Tri-Color Wheel w/Paddles / EIBACH Pro-Kit / AKEBONA F. & EBC RED-STUFF R.Dustless Pads / Drilled & Slotted ROTORS / MIRO M6 Reps / MICHELIN PS2's / U.R.Coated DP's / CYBA-QUAD Exhaust Tips / BMS-TUNED...
	Appreciate 0 Quote

11-29-2008, 11:22 PM	#8
wrh3 Car Guy 31 Rep 796 Posts Drives: 2005 MCS, 2013 Corvette 427 Join Date: Aug 2007 Location: ATL, GA iTrader: (10)	I may be in to, I need to get my DPs in..... __________________ Bill- 2005 Mini Cooper S, 2013 Corvette 427 www.billswebspace.com/bmwindex BMW CCA Member # 389948
	Appreciate 0 Quote

11-29-2008, 11:25 PM	#10
wrh3 Car Guy 31 Rep 796 Posts Drives: 2005 MCS, 2013 Corvette 427 Join Date: Aug 2007 Location: ATL, GA iTrader: (10)	That would be cool and much better than me under the car on ramps.....they are RR V1s I would be forever in your debt..... __________________ Bill- 2005 Mini Cooper S, 2013 Corvette 427 www.billswebspace.com/bmwindex BMW CCA Member # 389948
	Appreciate 0 Quote

11-30-2008, 12:47 AM	#11
AlpineM6GC Private First Class 11 Rep 155 Posts Drives: 2015 M6 GC 2024 X5 50e Join Date: Jul 2007 Location: Atlanta, GA iTrader: (1)	I'm game too. Scalbert, pm me if it goes down. Danny
	Appreciate 0 Quote

11-30-2008, 01:47 PM	#15
JoosyJoos Major 113 Rep 1,347 Posts Drives: 2011 335d Join Date: Apr 2007 Location: Atlanta, GA iTrader: (1) Garage List 2008 BMW 335i [0.00]	Count me in!! __________________ 1997 M3 Coupe - BMWCCA I-Prepared #22 2006 M Roadster - 23,000 miles and slowly counting
	Appreciate 0 Quote

11-30-2008, 01:54 PM	#16
AlpineM6GC Private First Class 11 Rep 155 Posts Drives: 2015 M6 GC 2024 X5 50e Join Date: Jul 2007 Location: Atlanta, GA iTrader: (1)	The 10th is good for me. 17th I'm working
	Appreciate 0 Quote

11-30-2008, 06:30 PM	#17
zenmaster Brigadier General 1577 Rep 3,888 Posts Drives: '17 M2 Join Date: Mar 2007 Location: Atlanta iTrader: (1)	I'll be there.
	Appreciate 0 Quote

12-24-2008, 08:02 PM	#19
scalbert Major General 153 Rep 5,780 Posts Drives: '13 S4, '15 Q7 Join Date: Feb 2007 Location: Woodstock, GA iTrader: (8)	Yes, it will be. Just haven't confirmed the date yet.
	Appreciate 0 Quote

12-24-2008, 08:04 PM	#20
scalbert Major General 153 Rep 5,780 Posts Drives: '13 S4, '15 Q7 Join Date: Feb 2007 Location: Woodstock, GA iTrader: (8)	It looks like less than ten (counting two others I knwo will come), which is fine. Just want to give the shop an estimate.
	Appreciate 0 Quote

12-26-2008, 11:46 AM	#21
triple35 Private First Class 8 Rep 127 Posts Drives: 2007 AW 335i 6mt Join Date: Nov 2007 Location: atlanta, ga/ west palm beach,fl iTrader: (0)	if you need a stock 335 for a basline run im in....I'd like to go just to meet some bmw guys in the area.
	Appreciate 0 Quote