[Kk79]

Please help!!

I bought a front end damaged bwm 420d 2017, having replaced the bumper and headlight and roof air bag and driver/passenger airbag and seat belt tensioner driver side. I’m getting parking fault when trying to reserve, also parking sensors not working. Airbag faults for driver and passenger airbag and roof airbag. Have tried a few machines to delete codes but not been successful. I went to bmw to see if they can help, they did a free diagnostic test I have attached the copy. They did inform me that it will need to be coded??!! Not sure what that means.

Also, when braking the car does shake, did show a ABS fault, not on the dash, but when do I bnb a diagnostic test.

Any advice would be much appreciated.

Thanks
27FA00
Information: Ambient temperature, signal: Open or short circuit to B+
801C20 ZGM: central fault memory full - no control-unit fault
8032D0
Ultrasonic sensor, front outer left, signal line: Line disconnection
804483 Rain-light-solar-condensation sensor: Fault condensation sensor
930901
Driver's airbag, interval stage 1: Short-circuit to earth
930913 Front passenger airbag, stage 1: Short-circuit to earth
930925
Driver's seat belt tensioner: Short-circuit to earth
930937 Front passenger's seat belt tensioner: Short-circuit to earth
930979
Driver's side airbag: Short-circuit to earth
93097F
Front passenger's side airbag: Short-circuit to earth
930985 Head airbag, left: Short-circuit to earth
93098B
Head airbag, right. Short-circuit to earth
930991 Safety battery terminal: Short-circuit to earth
930ABD ACSM: Internal fault
B7F328 CB: Microphone 1: Open circuit
B7F655
Instrument panel: Outside temperature sensor Short circuit to B+
CD9402 Signal (ambient temperature, 0x2CA) invalid, transmitter KOMBI
D0142C Instrument panel interface (ambient temperature, 252.1.4): Signal
invalid
D3542C KOMBI interface (outside temperature, ID: 0X2CA): Signal invalid
EOECOF KOMBI interface (ambient temperature, 0x2CA) signal invalid
E71401 Signal (ambient temperature, 0x2CA) invalid, transmitter KOMBI
E71402
Signal (ambient temperature not filtered, 0x2CA) invalid, transmitter
KOMBI
E71431
Signal (fogging on windscreen, 0x2D1) invalid, transmitter FEM / BDC
E71432
Signal (temperature of heated windscreen, 0x2D1) invalid, transmitter
FEM / BDC
S 0777
Engine tuning detected by the automated test