|
|
01-22-2010, 01:51 PM | #1 |
First Lieutenant
40
Rep 305
Posts |
FS/FT 621whp Jetta GLI
I would like to trade for a 135i or a 335i (possibly with cash). Lets make a deal Ive been working on this car for the last 4 years now. I had it built and tuned by Secret Services Auto in Houston Texas. This is my daily driver. I drive it everyday to and from work, and to and from the races with no problems. I am selling because i am getting out of the VW scene for a while, and getting into the BMW scene. Dyno Numbers 315whp @ 7psi 415whp @ 15psi 509whp @ 20psi 573whp @ 24psi 621whp @ 28psi on Q16 race gas No sheet I dont know why, they made the pull, i saw what it made on the screen, but the sheet did not print out. Engine: Schimmel Block 9:1 JE Forged Pistons Pauter Rods Garrett GT35R 1.06 Tectonic Tuning 264/260 cams 034 Motorsports Stage IIc Standalone Bosch ID 1000cc injectors ARP Rod bolts, main bolts, and head studs Stage 3 Ported and Polished Head by 034 Motorsports Rothe Engineering Short Runner Intake Manifold DBC Ported Throttle body 3" Intercooler Piping Precision 600hp Intercooler Hargett Clamps on every piece of piping 3" Downpipe to straight Mandrel bent Vbanded Exhaust PagParts Log Manifold 4bar fpr Bosch 044 in tank fuel pump with -6 AN lines Custom Catch can by SSA Tranny: TCS Stage 3 Clutch Autotech Wavetrac Diff Autotech 11lb flywheel Engine Management: 034 Motorsports Stage IIc Standalone Innovate Wideband Air/Fuel All DBC conversion hardware Interior: Suede Headliner Heated Seats Stewert Warner: Boost, Oil Pressure, Fuel Pressure, Digital Tach and shift light Gauge Clarion Double Din MAX675 touch screen Exterior: Badgeless grill Trunk m3 spoiler 5% tint 18x8 and 18x9 Raderwerk Gold MT-80s Mickey Thompson 245/40/18 Drag Radials Europlate Suspension: H&R Coilovers H&R 10mm and 20mm spacers Neuspeed 32mm adjustable rear sway bar BFI Rear Upper stress bar Autotech Strut bar TT/R32 bushings Car is nasty, on the 600hp tune it just roast 5th gear all the way through. On low boost 16psi it doesnt catch until 4th gear Video of me vs 11 second SRT4 http://www.youtube.com/watch?v=SVjTk8KMumU Speedo shot at 18psi Yes i bounce off the rev limiter a lot!! Ill get another video when i actually get traction Topping 5th gear out http://www.youtube.com/watch?v=qm3PspgJusM MY GIRLFRIEND TOOK THESE PICS WITH A POINT AND SHOOT SO CUT HER SOME SLACK K? And now the Engine bay shots The bumper is on with a lip. It does fit, finally. I have over $30,000 invested in this car over the lifetime. I know i will not ever get what i want for it, so im going to make this sale best offer. Please dont bother with offers you know i wont accept. This is, btw, the highest hp MK4 Jetta that i know of. You will be buying a piece of history when you purchase this car. It pains me to see it go, but its time for me to move on. |
01-22-2010, 08:37 PM | #2 |
Captain
62
Rep 657
Posts |
Amazing HP from a 4-banger.
Can't help with a trade, but I do have a 135 FS if you can move your car. It's too fast for me with just a tune. Don't know what I'd do with 600HP. |
Appreciate
0
|
01-24-2010, 03:00 AM | #3 |
BTC maxi
220
Rep 1,123
Posts |
|
Appreciate
0
|
01-25-2010, 05:37 PM | #5 |
First Lieutenant
40
Rep 305
Posts |
Thats because its a 24v, your 95 is a 12v, they are two different generation VR6's, plus mines on a SRI, you probably have a stock manifold.
I am interested in the 135 however, can you show post some pics and the price? |
Appreciate
0
|
01-25-2010, 05:54 PM | #6 |
Captain
62
Rep 657
Posts |
Yup, mine was bone stock except for a GIAC chip. I really liked that motor, though, even if it was a few ponies shy of 600 (like about 400+ shy!). I put 100K miles on it with no problems.
135 info: http://www.1addicts.com/forums/showthread.php?t=334965 The 135 has been fun, but I don't need it any more as a daily driver, and I'm going to focus my resources on my track activities. |
Appreciate
0
|
01-26-2010, 04:12 PM | #7 |
Bates '08 Interlagos Launch
125
Rep 1,230
Posts |
Holy torque steer batman.
__________________
Custom Exhaust Project: Bates Valvetronic exhaust: http://www.m3post.com/forums/showthread.php?t=253661 -- Exhaust Mod pics in here: http://www.flickr.com/photos/40236795@N03/
DON'T BUY Race Ready Performance electronic cutout valves. Here's why: http://www.m3post.com/forums/showthr...40#post9589740 |
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|