Help! Anyone have a Cobb AP?

TiAg335i · 04-04-2011, 04:48 PM

*EDIT: All is well...Cobb AP installed successfully after checking the 'Check for beta firmware box' in the AP manager.

Sal G@Camber-Toe · 04-04-2011, 04:55 PM

damn sorry to hear. What kind of cable is it? detachable? I might have a cable laying around if they are interchangeable. (serial to obd)

Does it say why it wont communicate with the car, you obviously dont have another tune intercepting the diag port..

TiAg335i · 04-04-2011, 05:04 PM

Quote:

Originally Posted by Sal G@Camber-Toe

damn sorry to hear. What kind of cable is it? detachable? I might have a cable laying around if they are interchangeable. (serial to obd)

Does it say why it wont communicate with the car, you obviously dont have another tune intercepting the diag port..

The error says "ECU Comms" or something like that. And basically says it cannot communicate with the car, please check the connection and try again.

I tried it like 5 times different ways each time, and it can't connect at all...really frustrating. I have no other tune, my car is absolutely bone stock. I called Cobb and they said they can send me a new cable but of course that is more waiting...

It's a detachable cable. The end that connects to the Cobb is a 10 prong square head.

And to add to the frustration PYSpeed STILL hasn't sent me a tracking number (which means it probably hasn't shipped) for my exhaust and it's over a week now. Sent them numerous PM's and emails, nothing.

Sal G@Camber-Toe · 04-04-2011, 05:08 PM

Quote:

Originally Posted by TiAg335i

The error says "ECU Comms" or something like that. And basically says it cannot communicate with the car, please check the connection and try again.

I tried it like 5 times different ways each time, and it can't connect at all...really frustrating. I have no other tune, my car is absolutely bone stock. I called Cobb and they said they can send me a new cable but of course that is more waiting...

It's a detachable cable. The end that connects to the Cobb is a 10 prong square head.

And to add to the frustration PYSpeed STILL hasn't sent me a tracking number (which means it probably hasn't shipped) for my exhaust and it's over a week now. Sent them numerous PM's and emails, nothing.

Damn, sorry bro. Only cable I have is a serial to OBD. No usb or anything else?? I've got a usb to OBD but thats it

stupid question and I'm sure you tried it, but does the car have to have ign on? I dont know much about how to use the cobb but would assume so

TiAg335i · 04-04-2011, 05:11 PM

Quote:

Originally Posted by Sal G@Camber-Toe

Damn, sorry bro. Only cable I have is a serial to OBD. No usb or anything else?? I've got a usb to OBD but thats it

stupid question and I'm sure you tried it, but does the car have to have ign on? I dont know much about to use the cobb but would assume so

It's no problem man...the Cobb has two ports: one port connects to the OBD via a 9 prong female connection and the other port is a USB.

And I had the ignition on and everything...this doesn't seem like a common problem so I might be at fault but I tried it many different ways and followed directions exactly...

Sal G@Camber-Toe · 04-04-2011, 05:11 PM

Quote:

Originally Posted by TiAg335i

It's no problem man...the Cobb has two ports: one port connects to the OBD via a 10prong female connection and the other port is a USB.

oo, will it work without the 10 prong and just USB?? I have a USB to OBD cable that I use for coding.....lmk

TiAg335i · 04-04-2011, 05:13 PM

Quote:

Originally Posted by Sal G@Camber-Toe

oo, will it work without the 10 prong and just USB?? I have a USB to OBD cable that I use for coding.....lmk

Hmmm...I'm not sure, but I doubt it. I guess I could always ask.

Sal G@Camber-Toe · 04-04-2011, 05:15 PM

Quote:

Originally Posted by TiAg335i

Hmmm...I'm not sure, but I doubt it. I guess I could always ask.

yea find out and lmk. I have that and a 9pin serial to USB.

TiAg335i · 04-04-2011, 05:20 PM

Quote:

Originally Posted by Sal G@Camber-Toe

yea find out and lmk. I have that and a 9pin serial to USB.

Cool, thanks man. The connection on the Cobb unit is actually a 9 prong port, not 10 prong, there is a slot for a 10th prong but no prong there. It's a square connection (sorry I am illiterate when it comes to this stuff).

A 9 pin serial could possibly work! Are the pins in a square arrangement? I made a thread in the tuning section about this...

TiAg335i · 04-04-2011, 05:22 PM

This is what the connection looks like if this helps at all...right next to it is a USB port

Sal G@Camber-Toe · 04-04-2011, 05:23 PM

Quote:

Originally Posted by TiAg335i

Cool, thanks man. The connection on the Cobb unit is actually a 9 prong port, not 10 prong, there is a slot for a 10th prong but no prong there. It's a square connection (sorry I am illiterate when it comes to this stuff).

A 9 pin serial could possibly work! Are the pins in a square arrangement? I made a thread in the tuning section about this...

Its all good, this is what the serial cable looks like

Sal G@Camber-Toe · 04-04-2011, 05:31 PM

i think your answer is in the other thread...gl!

TiAg335i · 04-04-2011, 05:31 PM

Hmm..if the prongs are on the cable, it won't work because the prongs are on the Cobb unit itself...thanks though man.

Sal G@Camber-Toe · 04-04-2011, 05:32 PM

Quote:

Originally Posted by TiAg335i

Hmm..if the prongs are on the cable, it won't work because the prongs are on the Cobb unit itself...

that was just an example picture to show the shape of the pins and everything. My cable has a female serial connection to ODB

MikeyComputers · 04-04-2011, 05:37 PM

john is sal mention is 400 bucks to borrow his cable....

TiAg335i · 04-04-2011, 05:38 PM

Quote:

Originally Posted by MikeyComputers

john is sal mention is 400 bucks to borrow his cable....

Sal wouldn't do that to me

Anywho I'm going to try out what they suggested...it seems like it might work!!!

Sal G@Camber-Toe · 04-04-2011, 05:39 PM

Quote:

Originally Posted by MikeyComputers

john is sal mention is 400 bucks to borrow his cable....

shhhhhhhhh

hahahah

Sal G@Camber-Toe · 04-04-2011, 05:40 PM

Quote:

Originally Posted by TiAg335i

Sal wouldn't do that to me

Anywho I'm going to try out what they suggested...it seems like it might work!!!

good luck!
Its a beautiful day for some new power

TiAg335i · 04-04-2011, 05:47 PM

Quote:

Originally Posted by Sal G@Camber-Toe

good luck!
Its a beautiful day for some new power

Precisely! I haven't been this excited in a while. Hopefully I don't get a ROM error now!

TiAg335i · 04-04-2011, 06:32 PM

Install Successful!

Time to try this baby out!

Sal G@Camber-Toe · 04-04-2011, 06:34 PM

Quote:

Originally Posted by TiAg335i

Install Successful!

Time to try this baby out!

Pathy01 · 04-04-2011, 06:53 PM

I've got a COBB AP and I will be at Camber Toe Wednesday around 4:30 for an exhaust swap if that helps and you don't get it resolved before that.

04-04-2011, 04:48 PM	#1
TiAg335i Trance Life 315 Rep 4,706 Posts Drives: 2007 E92 335i Join Date: Jan 2007 Location: Long Island, NY iTrader: (4)	Help! Anyone have a Cobb AP? EDIT: All is well...Cobb AP installed successfully after checking the 'Check for beta firmware box' in the AP manager. __________________ Vanguard V2 Exhaust//Vishnu DCI//ACM Angel Eyes* Last edited by TiAg335i; 04-04-2011 at 08:24 PM..
	Appreciate 0 Tweet Quote

04-04-2011, 04:55 PM	#2
Sal G@Camber-Toe 203 Rep 14,190 Posts Drives: E92 335xi 6mt Join Date: Jun 2009 Location: Long Island, NY iTrader: (2)	damn sorry to hear. What kind of cable is it? detachable? I might have a cable laying around if they are interchangeable. (serial to obd) Does it say why it wont communicate with the car, you obviously dont have another tune intercepting the diag port..
	Appreciate 0 Quote

04-04-2011, 05:22 PM	#10
TiAg335i Trance Life 315 Rep 4,706 Posts Drives: 2007 E92 335i Join Date: Jan 2007 Location: Long Island, NY iTrader: (4)	This is what the connection looks like if this helps at all...right next to it is a USB port __________________ Vanguard V2 Exhaust//Vishnu DCI//ACM Angel Eyes
	Appreciate 0 Quote

04-04-2011, 05:31 PM	#12
Sal G@Camber-Toe 203 Rep 14,190 Posts Drives: E92 335xi 6mt Join Date: Jun 2009 Location: Long Island, NY iTrader: (2)	i think your answer is in the other thread...gl!
	Appreciate 0 Quote

04-04-2011, 05:31 PM	#13
TiAg335i Trance Life 315 Rep 4,706 Posts Drives: 2007 E92 335i Join Date: Jan 2007 Location: Long Island, NY iTrader: (4)	Hmm..if the prongs are on the cable, it won't work because the prongs are on the Cobb unit itself...thanks though man. __________________ Vanguard V2 Exhaust//Vishnu DCI//ACM Angel Eyes
	Appreciate 0 Quote

04-04-2011, 05:37 PM	#15
MikeyComputers Captain 45 Rep 649 Posts Drives: 2007 335i 6mt White/red Join Date: Nov 2010 Location: Williston Park new york iTrader: (3) Garage List 2007 335i [6.00]	john is sal mention is 400 bucks to borrow his cable....
	Appreciate 0 Quote

04-04-2011, 06:32 PM	#20
TiAg335i Trance Life 315 Rep 4,706 Posts Drives: 2007 E92 335i Join Date: Jan 2007 Location: Long Island, NY iTrader: (4)	Install Successful! Time to try this baby out! __________________ Vanguard V2 Exhaust//Vishnu DCI//ACM Angel Eyes
	Appreciate 0 Quote

04-04-2011, 06:53 PM	#22
Pathy01 Private First Class 10 Rep 191 Posts Drives: F30 335i xDrive Join Date: Dec 2010 Location: Long Island, NY iTrader: (4)	I've got a COBB AP and I will be at Camber Toe Wednesday around 4:30 for an exhaust swap if that helps and you don't get it resolved before that.
	Appreciate 0 Quote