[MikeStig]

I was wondering if anyone has anything around 5 feet x 2 feet piece of 3m 1080 scotch print vinyl. I have been wrapping my trim and ordered 3 feet x 5 feet from AVS on accident. All of my pieces have the weave going towards the right (////). However, the 3 feet side is the one that is that direction so the center dash piece of trim is too wide. I don't want to be forced to have it go to opposite direction.

(To try and clear that up)...

What I want:


What Im forced to do:

[335iNavyGuy]

Might have to end up buying a new roll from ebay

[MikeStig]

Originally Posted by 335iNavyGuy

Might have to end up buying a new roll from ebay

Seriously? Gotta drop like $70 just for one piece?! What size do you think I should go with? I just need to do the center dash

[335iNavyGuy]

Originally Posted by MikeStig

Seriously? Gotta drop like $70 just for one piece?! What size do you think I should go with? I just need to do the center dash

I've found them al over ebay for about 35$. I have ordered a ton of it.

[MikeStig]

Originally Posted by 335iNavyGuy

I've found them al over ebay for about 35$. I have ordered a ton of it.

I know but how am I going to be sure I will get the weave facing the correct direction

[SUHleen]

Not to steer away from your thread but is this type of vinyl the stuff that is pretty thin and goes on the best/turns out the best? And it is not a dull finish nor is it glossy its like a satin CF? My center console and steering wheel was left wrapped when I bought the car but the rest was not. I want to buy matching material...

[MikeStig]

Originally Posted by SUHleen

Not to steer away from your thread but is this type of vinyl the stuff that is pretty thin and goes on the best/turns out the best? And it is not a dull finish nor is it glossy its like a satin CF? My center console and steering wheel was left wrapped when I bought the car but the rest was not. I want to buy matching material...

I wrapped a few pieces today. The material is very easy to work with, using a blow drier really helps to stretch it around the corners. Just have patience and you will get the hang of it. The material kind of has a texture to it, its not dull nor is it extremely glossy. I love the way everything turned out so far. Hope this helped.

[Sidewinderpb]

I just wrapped my interior yesterday. You can order it from amazon. It will be 12"x60" for $19.99. Perfect size for center dash. I just used the same thing.

Edit: if you pm me your email address, I'll send you pics of mine.

[335iNavyGuy]

http://www.ebay.com/itm/60-X-24-3D-R...bb2bcb&vxp=mtr

9.99 60x24 3m

[stashtrey]

You need the whole length of the dash piece? I will see what my remnants look like at home.