Any tips or tricks to get these installed quick and easy? hopefully i can just slide under and hook'em up without having to remove anything!
Please guide me wise people!
223VIEWS
5REPLIES
5APPRECIATES
4ACTIVE PEOPLE
05-16-2026LAST POST
Any tips or tricks to get these installed quick and easy? hopefully i can just slide under and hook'em up without having to remove anything!
Please guide me wise people!
Drossi92 wroteI crawled under and looked today, it is tight. I was able to unplug the valve cables but they didn’t click into the 11mode connector. I didn’t want to tug on the cable to hard so I just plugged it back into where it was. Did u have any issues with it fitting into the 11mode?? Maybe I just didn’t press firmly enough. I’ll have to give it another try.Extremely easy to do. Get under the car and disconnect the valve wires. Then just place the 11mode between the wire and the valve controller. I didn’t need to do anything but crawl under and feel around a bit with my hands. You will feel everything click when it connects. It’s tight but doable and probably took me 5 minutes in total.
I had some 4 inch ramps which helped give me some elbow room
G-Mann wroteThanks I haven’t yet! Appreciate it!Here's a decent video if you haven't installed yet
I had some 4 inch ramps which helped give me some elbow room
