Bimmerpost Logo Bimmerpost
G05
BMW X5
New Posts BMW Garage Search
73.8KVIEWS
173REPLIES
37APPRECIATES
82ACTIVE PEOPLE
03-25-2026LAST POST
06-04-2022
Hi all,

Did anybody try to enable Auto Speed Limit Assist (aSLA) and Traffic Light Assist (TLA) through the cheat code available in Bimmerutility.

currently speed assist works fine with all the options (adjust automatically, manually, show anticipation, etc..), However, the rest of the options are grayed out and can not be selected.

I noticed in the cheat code XML that it requires coding in 4 parts, I was able to locate 3 of them only. The first part (1/4) is missing. Not sure if that is intentional. So currently, I can see 'Consider traffic lights' but not selectable, same as 'Display traffic light phases'

Any thoughts on this is highly appreciated. Thanks.

Here is some background and screenshots.

2020 G06 fully loaded with 5AU, etc.., Using E-Sys 3.38.2, PSdZData lite V.4.35.21. I-step S18A-22-03-553.
An image attached to this post, provided by the posterAn image attached to this post, provided by the posterAn image attached to this post, provided by the posterAn image attached to this post, provided by the posterAn image attached to this post, provided by the posterAn image attached to this post, provided by the posterAn image attached to this post, provided by the poster
06-04-2022
has128 wrote
Hi all,

Did anybody try to enable Auto Speed Limit Assist (aSLA) and Traffic Light Assist (TLA) through the cheat code available in Bimmerutility.

currently speed assist works fine with all the options (adjust automatically, manually, show anticipation, etc..), However, the rest of the options are grayed out and can not be selected.

I noticed in the cheat code XML that it requires coding in 4 parts, I was able to locate 3 of them only. The first part (1/4) is missing. Not sure if that is intentional. So currently, I can see 'Consider traffic lights' but not selectable, same as 'Display traffic light phases'

Any thoughts on this is highly appreciated. Thanks.

Here is some background and screenshots.

2020 G06 fully loaded with 5AU, etc.., Using E-Sys 3.38.2, PSdZData lite V.4.35.21. I-step S18A-22-03-553.
Pm me your email address as I have a cheat sheet specifically for G05 that includes coding for the fourth ECU & more
06-04-2022
Bambazonke wrote
has128 wrote
Hi all,

Did anybody try to enable Auto Speed Limit Assist (aSLA) and Traffic Light Assist (TLA) through the cheat code available in Bimmerutility.

currently speed assist works fine with all the options (adjust automatically, manually, show anticipation, etc..), However, the rest of the options are grayed out and can not be selected.

I noticed in the cheat code XML that it requires coding in 4 parts, I was able to locate 3 of them only. The first part (1/4) is missing. Not sure if that is intentional. So currently, I can see 'Consider traffic lights' but not selectable, same as 'Display traffic light phases'

Any thoughts on this is highly appreciated. Thanks.

Here is some background and screenshots.

2020 G06 fully loaded with 5AU, etc.., Using E-Sys 3.38.2, PSdZData lite V.4.35.21. I-step S18A-22-03-553.
Pm me I have a cheat sheet specifically for G05 that includes coding for the fourth ECU & more
Thank you Sir. PM sent.
06-17-2022
hello has, how were you able to add the speedlimit marker in KSA and the traffic assistant? any help would be appreciated.
07-06-2022
Bambazonke wrote
Pm me your email address as I have a cheat sheet specifically for G05 that includes coding for the fourth ECU & more
Could you send TLA codes for me also? Thanks a lot
07-07-2022
Bambazonke wrote
Pm me your email address as I have a cheat sheet specifically for G05 that includes coding for the fourth ECU & more
Were you able to apply Traffic light assistant settings in Australia?

I tried to do enable these using esysX but couldn't enable them. Got error message that 'This setting is not enabled for your location
07-07-2022
OzJedi wrote
Bambazonke wrote
Pm me your email address as I have a cheat sheet specifically for G05 that includes coding for the fourth ECU & more
Were you able to apply Traffic light assistant settings in Australia?

I tried to do enable these using esysX but couldn't enable them. Got error message that 'This setting is not enabled for your location
No, I couldn't either.
07-07-2022
OzJedi wrote
Were you able to apply Traffic light assistant settings in Australia?

I tried to do enable these using esysX but couldn't enable them. Got error message that 'This setting is not enabled for your location
I have enabled the coding but TLA still does not work here as the Aus/NZ map database does not contain TLA location data which i think is a prerequisite for it to work. If you leave the "Consider Traffic Lights" box unticked the system will not show an error after the car is shut down and restarted.

I live in hope that with the advent of ID8 and more advanced navigation systems the map database will one day include it for all previous versions. Emergency Corridor option does not work either not sure why but probably the same reason as TLA.

UCC works well on the open road but not that great around town and has certainly saved me a few $$$ in speeding fines.
07-08-2022
aSLA works fine using BimmerUtility (adjusting manually, not with "Cheat codes" option in BimmerUtility), however TLA does not work.
I have done all these (bellow in PDF)- but TLA still "not available in this country". Also - VIP ECU returns an error while coding.

Any ideas?
G05 X5 Coding Sheet_MY21-Storage_Info copy (1).pdf
07-08-2022
Makaronai wrote
aSLA works fine using BimmerUtility (adjusting manually, not with "Cheat codes" option in BimmerUtility), however TLA does not work.
I have done all these (bellow in PDF)- but TLA still "not available in this country". Also - VIP ECU returns an error while coding.

Any ideas?
As mentioned above, TLA needs traffic lights data in maps database to work.

As for VIP ECU, you can't code it while engine is running.
07-08-2022
Makaronai wrote
aSLA works fine using BimmerUtility (adjusting manually, not with "Cheat codes" option in BimmerUtility), however TLA does not work.
I have done all these (bellow in PDF)- but TLA still "not available in this country". Also - VIP ECU returns an error while coding.

Any ideas?
Need to put car in diagnostic mode (press start button 3 times in quick succession without foot on the brake pedal). You will then see a message in your instrument cluster telling you when you are in diagnostic mode then code
07-10-2022
For me everything works in my country (Slovenia) except UCC.
UCC is not working at all in Europe.
TLA works, but most time i need to press SET on red light.
On monday i was driving from Slovenia to Macedonia.
SLI must to be coded to work in Serbia and Macedonia (it is coded on my car)
So aSLA works in Slovenia, Croatia, Serbia and Macedonia.
Emergency corridor works in Slovenia and Croatia, even on border between those two countries.
In Serbia and Macedonia i get massage emergency corridor and TLA are not supported in those two countries. In Macedonia i saw traffic lights on map, but TLA doesn't work.
Even Stop and Yield sign detection are working in these 4 countries, but in Macedonia i don't get sound notification. I just get sign warning in speedo.
07-13-2022
Sure, I put the car in diagnostic mode and coded aSLA successfully.
aSLA works perfect, car changes the speed according to driving conditions and signs.

However TLA coding according to BimmerUtility cheat codes does not give a positive result.

I believe the navigation system does have the traffic light information (I could code it half a year ago and saw the lights on the map), but after the BMW update it's gone.
07-13-2022
has128 wrote
As mentioned above, TLA needs traffic lights data in maps database to work.

As for VIP ECU, you can't code it while engine is running.
as some user mentioned already - VIP module acts strange: you can code it successfully after some tries. Coding gave an error 3 times and 4th time coded successfully. Can't explain.
07-13-2022
Bambazonke wrote
I have enabled the coding but TLA still does not work here as the Aus/NZ map database does not contain TLA location data which is a prerequisite for it to work. If you leave the "Consider Traffic Lights" box unticked the system will not show an error after the car is shut down and restarted.

I live in hope that with the advent of ID8 and more advanced navigation systems the map database will one day include it for all previous versions. Emergency Corridor option does not work either not sure why but probably the same reason as TLA.

UCC works well on the open road but not that great around town and has certainly saved me a few $$$ in speeding fines.

PS Anybody who wants my cheat sheet please PM me their email address so I can send them a copy
I did successfully TLA in previous software version - map showed traffic light icons etc and TLA worked fine except automatic stop (it just showed the light in HUD and cluter). After an update from BMW- of course coding is gone. So I believe the mapping data already has all the traffic lights info - but my code sheet was not accurate now.
07-22-2022
Makaronai wrote
I did successfully TLA in previous software version - map showed traffic light icons etc and TLA worked fine except automatic stop (it just showed the light in HUD and cluter). After an update from BMW- of course coding is gone. So I believe the mapping data already has all the traffic lights info - but my code sheet was not accurate now.
Do you have copies of your old ncd files prior to update? If so use the NCD Compare option in BimmerUtility to check your coding.
It sounds like one of the land mask values might NOT be correct ie (FF,FF,FF,FF) or you have a syntax error in your FDL coding values. One minor syntax error is enough to prevent it from working
07-24-2022
Bambazonke's user avatarBambazonke please send g05 related cheat sheet. rulppa @ me.com

New user, not able to pm. Thanks!
07-26-2022
rulppa wrote
Bambazonke's user avatarBambazonke please send g05 related cheat sheet. rulppa @ me.com

New user, not able to pm. Thanks!
Sent
07-26-2022
Bambazonke's user avatarBambazonke Please send g05 related cheat sheet to:

cupola_rumors.06@icloud.com

Many thanks
07-26-2022
Do you need ACC for TLA? I wanna do this for my x3M
07-26-2022
redbullfan wrote
Do you need ACC for TLA? I wanna do this for my x3M
You need Driver Assist Professional (5AU)
Anybody wanting a copy of the Cheat sheet can down load it at the BimmerUtility Facebook Group Site

https://www.facebook.com/groups/157324342107674/files/docs

Please note there are 2 codes specific to the G05 in the SAS3 & DSC_VIP

<function start="19" end="19" comment="IntRxSWINVarianten - Nr001 G05_G06_RxSWIN_neu" mask="11111111b">01</function>
<function start="17" end="17" comment="IntRxSWINVarianten - Nr001 G05_G06_RxSWIN_neu" mask="11111111b">01</function>

These 2 FDL settings above will differ if you are coding another G series model
07-27-2022
Thanks Shaun.

Has anyone got ‘Highway Exit Assistant’ to come up on their Headunit/screen as an option?
Have done the coding but no joy, is the only one can’t get to come up.

2005-2026 BIMMERPOST.com 1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST BMW is a registered trademark of BMW AG. Visit BMW and BMWUSA, which are our favorite sites on the internet
Privacy Policy
Terms of Service & DMCA Policy