nycboy wroteI took my car to a local shop near for the job. It’s much easier if you can put the car on a lift to put the screws in.I'm looking at the same front lip, is it an easy install?
45.4KVIEWS
165REPLIES
174APPRECIATES
91ACTIVE PEOPLE
8 hours agoLAST POST
https://ebay.us/m/uCZhYP
silverfox35125 wroteThat's a 4 piece front lip, I read the 3 piece ones are closer to the OEM. True?
https://jc-sportline.en.alibaba.com/productgrouplist-213069779/X1_X3_X4_X5_X6_X7.html
silverfox35125 wroteLooks nice. Any pics from other angles?
Thanks.
https://superautousa.com/products/fits-bmw-x5-g05-lci-m-package-2024-2025-front-bumper-lip?variant=46084111925422&country=US¤cy=USD&utm_medium=product_sync&utm_source=google&utm_content=sag_organic&utm_campaign=sag_organic&gad_source=1&gad_campaignid=22168219191&gbraid=0AAAAABIeXbmH98PIv4MEKIF23Awa54pG2&gclid=CjwKCAjwsZPDBhBWEiwADuO6y8poRlaJqic-0WcON6bq31s23pkT_sunKzSr5opt0zDL9uidMX5snxoCPvYQAvD_BwE
BigVegas17 wroteLooks very nice; did you have to drill any holes?3-piece front lip in gloss black by VTEN. I had the the outside pieces painted to match the car and the whole thing clear coated prior to install.
How do you place your front license plate? I plan to use Sto-n-show, and maybe cut out the portion of the lip where the sto-n-show will be at.
Thanks.
guaping wroteAttached with factory holes and 3m tapeLooks very nice; did you have to drill any holes?
How do you place your front license plate? I plan to use Sto-n-show, and maybe cut out the portion of the lip where the sto-n-show will be at.
Thanks.
As for how I place my front plate, I don’t. I have a sto-n-sho but I haven’t yet crawled under the front to see if it’s feasible to add the mounting plate under the face of the lip that runs through that area.
Gladiator1972 wroteI wouldn't really call it a full body kit but I got all mine from RW carbon.Bump....looking for a full bodykit for my LCI (rear spoiler, side skirts, and front lip) Any reasonably priced options for the US?
2025 X6 40i
silverfox35125 wrotei was looking at the same one , could you take a couple more pics front/side if you dont mind
AlexMe wroteHow did you install? Screw in additional hardware or use OEM holes, 3M tape??.$90 from Ebay. Installation took me maybe 2 hours.
2025 X6 40i
Tobster3 wroteI used OEM holes, 3M tape and put one additional little screw in the center.How did you install? Screw in additional hardware or use OEM holes, 3M tape??.
Sevn86 wroteRW carbon has some nice add on with reasonable price. Got mine as well from RW carbon. My cf mirror caps though came from german car accessories.I wouldn't really call it a full body kit but I got all mine from RW carbon.
onellucci wroteHere :i was looking at the same one , could you take a couple pics if you dont mind ? front /side etc
WTXRob wroteYes but in the middle you still have to drill two little holes and put to srews.Do any of the pre-lci front lips use the prexisting holes? I'm not too keen on drilling more holes into my bumper.
AlexMe wroteDid you use the provided screws for the center portion or just the double sided tape. The shop I went to didn't use the screws and the middle portion flew off on the highway.$90 from Ebay. Installation took me maybe 2 hours.
2025 X6 40i
