Exhaust Tips M50i

Trex1200r · 12-23-2021, 11:55 AM

Thought I would post this here as it is strictly a cosmetic mod.

Found these on Amazon: https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

I like these because they have a factory look to them.

I was able to get these pushed on so the tip of the exhaust pipes tucked nicely into the edge of the sleeves, but it took some moderate cutting on the two inside tips (the tips closes to the hitch). I cut 1/4" off of the back end of 2 sleeves so it would clear a bend in the pipe.

Others have installed them as well and are saying they were able to just push them on, but not sure they are getting the edges tucked into the rim or not.

Anyway, price is right and I like the results. They have been on for a few months now with no issues.

Here is a thread with some other options. Thanks to ninefourteener for doing the research on the dimensions needed.
https://g05.bimmerpost.com/forums/sh....php?t=1732018

TGTBTU · 12-23-2021, 12:06 PM

Looks like a very clean install and it looks great.

Russ103 · 12-24-2021, 12:45 PM

Looks great! And for $20 I see no reason to not try it

NYCX5M50i · 12-25-2021, 08:36 PM

Looks Clean

NCRob · 02-06-2022, 07:08 AM

I too added these to my X5M50i. Well worth $10 ea and about 1 minute total installation time!

JimVR4 · 02-06-2022, 10:50 PM

Quote:

Originally Posted by NCRob

I too added these to my X5M50i. Well worth $10 ea and about 1 minute total installation time!

Check the orientation on mine. It's a little different than what you did

NCRob · 02-07-2022, 06:47 AM

Quote:

Originally Posted by JimVR4

Check the orientation on mine. It's a little different than what you did

Ah, yes that does look better with those pronounced ends on the inside. I’ll have to adjust mine! Anyway good thing about this mod is a really quick fix to reposition

JimVR4 · 02-07-2022, 11:42 AM

Quote:

Originally Posted by NCRob

Ah, yes that does look better with those pronounced ends on the inside. I’ll have to adjust mine! Anyway good thing about this mod is a really quick fix to reposition

Exactly! I have the angles from left to right instead of top and bottom. They line up beautifully 😍

gqgambler · 02-07-2022, 09:30 PM

Quote:

Originally Posted by JimVR4

Check the orientation on mine. It's a little different than what you did

Did you cut yours as well?

JimVR4 · 02-07-2022, 11:05 PM

Quote:

Originally Posted by gqgambler

Did you cut yours as well?

No cutting needed

NCRob · 02-08-2022, 06:40 AM

No cutting needed on mine either

Trex1200r · 02-08-2022, 10:49 AM

Just to reiterate my post. Cutting is only required if you want the sleeves to push on all of the way. If you don't mind the exhaust within an exhaust look there is a ton of adjustability to orient the depth and angle and installation is as easy as it gets. Either way, you have options, all of which are an improvement over the thin little factory pipes sitting there.

BMWoody · 02-26-2022, 02:52 PM

Just got mine in the mail today. Will have to try a couple different angles

BMWoody · 02-27-2022, 02:03 PM

Anyone have any issues with them falling off?

NCRob · 02-27-2022, 04:56 PM

Quote:

Originally Posted by BMWoody

Anyone have any issues with them falling off?

None here and I have the same vehicle. Mine are so tight they require a lot of effort to pull off and reposition.

JimVR4 · 02-27-2022, 11:21 PM

Quote:

Originally Posted by BMWoody

Anyone have any issues with them falling off?

I've had them on for a while. They never move

mmm50i · 03-03-2022, 06:14 PM

Quote:

Originally Posted by JimVR4

Check the orientation on mine. It's a little different than what you did

Wow this looks great. It looks like you positioned them so that the extended portion of the tip (elongated tip) is facing the center of the car? Is that what you were referring to?

I'm going to order these tonight

JimVR4 · 03-03-2022, 07:31 PM

Quote:

Originally Posted by mmm50i

Quote:

Originally Posted by JimVR4

Check the orientation on mine. It's a little different than what you did

Wow this looks great. It looks like you positioned them so that the extended portion of the tip (elongated tip) is facing the center of the car? Is that what you were referring to?

I'm going to order these tonight

Yes that's right. It's such a simple and solid install. Props to the OP for finding these!

skindoc · 03-10-2022, 10:32 PM

Anyone have a tip on how to get them off after install? They are on pretty tight. Wanted to changed the angle a bit and didn't wanna yank too hard and screw something up

NCRob · 03-11-2022, 06:21 AM

Quote:

Originally Posted by skindoc

Anyone have a tip on how to get them off after install? They are on pretty tight. Wanted to changed the angle a bit and didn't wanna yank too hard and screw something up

You won’t do any damage pulling them off by hand. You do need to get a good grip so thin grip gloves might help you. Although I’m able to get mine off OK with nerve damage in my fingers so you should be fine.

elite-fusion · 03-15-2022, 09:21 PM

Will these fit a 19 x5 xDrive50i?

Not sire if its the same as the M50i but assume it is, ut figured I would double check to confirm

elite-fusion · 03-15-2022, 09:24 PM

Quote:

Originally Posted by JimVR4

Check the orientation on mine. It's a little different than what you did

CN you please elaborate what difference you have vs others. Sorry just not seeing the difference unless i am overlooking it lol

12-23-2021, 11:55 AM	#1
Trex1200r New Member 70 Rep 22 Posts Drives: 2022 X5 M50i, Audi SQ5 Join Date: Jul 2021 Location: CO iTrader: (0)	Exhaust Tips M50i Thought I would post this here as it is strictly a cosmetic mod. Found these on Amazon: https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1 I like these because they have a factory look to them. I was able to get these pushed on so the tip of the exhaust pipes tucked nicely into the edge of the sleeves, but it took some moderate cutting on the two inside tips (the tips closes to the hitch). I cut 1/4" off of the back end of 2 sleeves so it would clear a bend in the pipe. Others have installed them as well and are saying they were able to just push them on, but not sure they are getting the edges tucked into the rim or not. Anyway, price is right and I like the results. They have been on for a few months now with no issues. Here is a thread with some other options. Thanks to ninefourteener for doing the research on the dimensions needed. https://g05.bimmerpost.com/forums/sh....php?t=1732018 Attached Images
	Appreciate 17 Russ103308.00 Bearco65.00 Burnt C6257.50 3Wagon129.00 Tch-Nrd124.50 Jimbeau2128.00 sssmokie125.00 Kingkakay6.00 Blue87375.50 1Boxer34.50 Swerd43016.00 Bottom1615.50 Inglewood432.00 BSfmAZ94.50 sabrina493.50 1230vani652.50 PablitoX7m6.50 Tweet Quote

12-23-2021, 12:06 PM	#2
TGTBTU TGTBTU 84 Rep 140 Posts Drives: 2022 X5 X-drive M40i Join Date: Aug 2021 Location: Orlando, FL iTrader: (0)	Looks like a very clean install and it looks great.
	Appreciate 1 Trex1200r70.00 Quote

12-24-2021, 12:45 PM	#3
Russ103 First Lieutenant 308 Rep 340 Posts Drives: 2021 X5 M50i Join Date: Jan 2021 Location: MD iTrader: (0)	Looks great! And for $20 I see no reason to not try it
	Appreciate 1 Cruise'n71.00 Quote

12-25-2021, 08:36 PM	#4
NYCX5M50i Private First Class 64 Rep 185 Posts Drives: 2021 X5 M50i executive/DHP Join Date: Jun 2020 Location: New York iTrader: (0)	Looks Clean
	Appreciate 0 Quote

02-06-2022, 07:08 AM	#5
NCRob Captain 608 Rep 747 Posts Drives: 2021 BMW M5C Join Date: Nov 2021 Location: Asheville, NC iTrader: (0)	I too added these to my X5M50i. Well worth $10 ea and about 1 minute total installation time! Attached Images
	Appreciate 0 Quote

02-08-2022, 06:40 AM	#11
NCRob Captain 608 Rep 747 Posts Drives: 2021 BMW M5C Join Date: Nov 2021 Location: Asheville, NC iTrader: (0)	No cutting needed on mine either
	Appreciate 0 Quote

02-08-2022, 10:49 AM	#12
Trex1200r New Member 70 Rep 22 Posts Drives: 2022 X5 M50i, Audi SQ5 Join Date: Jul 2021 Location: CO iTrader: (0)	Just to reiterate my post. Cutting is only required if you want the sleeves to push on all of the way. If you don't mind the exhaust within an exhaust look there is a ton of adjustability to orient the depth and angle and installation is as easy as it gets. Either way, you have options, all of which are an improvement over the thin little factory pipes sitting there.
	Appreciate 1 Cruise'n71.00 Quote

02-26-2022, 02:52 PM	#13
BMWoody Private 43 Rep 80 Posts Drives: X5 Join Date: Jan 2022 Location: Texas iTrader: (0)	Just got mine in the mail today. Will have to try a couple different angles
	Appreciate 1 willpower26.00 Quote

02-27-2022, 02:03 PM	#14
BMWoody Private 43 Rep 80 Posts Drives: X5 Join Date: Jan 2022 Location: Texas iTrader: (0)	Anyone have any issues with them falling off? Attached Images
	Appreciate 0 Quote

03-10-2022, 10:32 PM	#19
skindoc Private 24 Rep 59 Posts Drives: 2022 BMW X6 M50i Join Date: Sep 2021 Location: NYC iTrader: (0)	Anyone have a tip on how to get them off after install? They are on pretty tight. Wanted to changed the angle a bit and didn't wanna yank too hard and screw something up
	Appreciate 0 Quote

03-15-2022, 09:21 PM	#21
elite-fusion Captain 161 Rep 606 Posts Drives: 335xi Join Date: Apr 2009 Location: NY iTrader: (0)	Will these fit a 19 x5 xDrive50i? Not sire if its the same as the M50i but assume it is, ut figured I would double check to confirm
	Appreciate 0 Quote