225KVIEWS
429REPLIES
94APPRECIATES
95ACTIVE PEOPLE
05-11-2026LAST POST
Bambazonke wroteHey for some reason I can’t pm anybodyPM me your email address. Please note I do not have the coding to enable anti dazzle as I have a European/ROW spec X5
Would you please send me cheat code sheet as well at
Aleksyski@gmail.com
Thank you!!
Im looking for cheat sheets or usefull ones for my EU (european) X5 45e . So if you do have some please send PM. Thanks in advance. El
anuj452 wroteDo you need to have Parking Assist with Surround View Package to see this option, or any car can code it? I don't see the following in ACSM ECU and mine just has the standard PDC, no optionalThanks ifr
I compared the codes and found below codes were different
ACSM5 -- [1B2D]
a_pdc: aktiv [01] -- Default : Initwert [00]
a_pdc_fp: aktiv [01] -- Default : Initwert [00]
HU_MGU -- [3E52]
ACTIVE_PDC: aktiv [01] -- Default : nicht aktiv [00]
After I made the changes, I do see the option in iDrive for "Active PDC with braking intervention" and I was able to activate through iDrive
Will have to test if this works as expected
Note : I did get some error messages on iDrive while coding, Parking Assistant malfunction, Driving assistance reduced
I was able to verify that the Automatic Parallel parking worked perfectly fine after the coding updates
ACSM 1B2D a_pdc
ACSM 1B2D a_pdc_fp
HU_MGU 3E52 ACTIVE_PDC
greetings and happy new year to everyone
Trying to code ASS to remember last setting. I have done this in my G01 by changing TCM_MSA_Memory to werte=01.
my G05 M50i has dual DMEs and I can see the TCM_MSA_Memory in both. Should I code both DMEs?
Is it possible to turn ot Drivign Assistance View without 5AU/5AS only with ACC?
The HORN_AT_SECURE option isn’t in my CAFD for BDC, nor is VIAMASTER_4_4
ifr wroteI had this working but the code got wiped during the Start/Stop recall update which installed the 03/2025 update. I recoded, and all Automatic PDC Activation options come up on iDrive screen and are selected, but the car no longer actually stops. Are there new code values in the 03/2025 update that need to be changed or is this just no longer going to work after the update?? Anyone else have this problem?? Thanks!I see the following codes. Some will be irrelevant so just compare and record with what you have, code the differences, and test:
[1B2D]
a_pdc: aktiv [01]
a_pdc_fp: aktiv [01]
apdc_activation: initwert [00]
apdc_generation: gen_1 [01]
auto_il: nicht aktiv [00]
auto_pdc: aktiv [01]
these codes are profile related so almost certainly not needed (my choices in idrive) :
pia_default_apdc: nicht aktiv [00]
pia_default_apdc_fp: nicht_aktiv [00]
pia_default_auto_il: aktiv [01]
pia_default_auto_pdc: aktiv [01]
[3E52]
ACTIVE_PDC: aktiv [01]
ACTIVE_PDC_FLANKENBREMSUNG: aktiv [01] - dont use this, as needs additional hardware (brakes on side too)
AUTO_PDC: aktiv [01]
PDC_FLANKENSCHUTZ: aktiv [01]
PDC_GENERATION: gen2 [01]
PDC_SENSOR_HINTEN: 4_sensoren [01]
PDC_SENSOR_VORN: 4_sensoren [01]
[430A]
AutoPdcAbstandSchwelleMS: StandardValue [64]
AutoPdcAbstandSchwelleRR: StandardValue [96]
AutoPdcAbstandSchwelleVFVR: StandardValue [3C]
AutoPdcFlanken_enable: StandardValue [00]
AutoPdc_enable: StandardValue [01]
BrakeDistIF_enable: APDC-ON [01]
ExProbThreshold_aPDC: StandardValue [66]
MRA_aPDCMonitoring: StandardValue [00]
[42C1]
C_SperraPDC: Nr001 18-07 G005_not_PHEV G015 [01]
C_Verwendung_PDC_Daten: Nr000_false [00]
C_aPDC_Applikation: Nr001_not_RearAEB [01]
C_aPDC_vorhanden: Nr001_vorhanden [01]
6ixSpd wroteMaybe outdated data, mine is in BDC 7083Anyone have the parameter needed to turn off the 2x horn when the car is running and you lock it from outside?
The HORN_AT_SECURE option isn’t in my CAFD for BDC, nor is VIAMASTER_4_4
