TravisBGolf also bought the same (mentioned on pg1).
45.4KVIEWS
165REPLIES
174APPRECIATES
91ACTIVE PEOPLE
6 hours agoLAST POST
TravisBGolf also bought the same (mentioned on pg1).
aug0211 wroteWhat side skirts are those? Maxton?Maxton v1
Sevn86 wroteYes, also Maxton v1What side skirts are those? Maxton?
HP Guy78 wroteWhere did you get the side skirts from? I don't see them on Icon's website. Thanks!Ikon motorsports
kid red wroteamazon. Type it inhp guy78 wrotewhere did you get the side skirts from? I don't see them on icon's website. Thanks!ikon motorsports
TravisBGolf wroteLooks great! Which color is your X5?Here is one I bought on Amazon. I believe it’s the same style as Ikon but it was only $40 and included all the necessary mounting hardware. I thought it was too good to be true but it fit very nicely and looks great. Time will tell how it holds up.
Gladiator1972 wroteThanks! It’s Dravit Grey. I purchased used so couldn’t be too picky on color but couldn’t be happier with the way it looks.Looks great! Which color is your X5?
HP Guy78 wroteHow difficult was install? Did you use rivets? Did you use 3m tape? Any help is appreciated. I just got my front lip and rear diffuser.Ikon motorsports
DJDANNYJ45 wroteI just installed mine yesterday. I didn't use any of the screws. I bought these and used them for all but 6 locations.How difficult was install? Did you use rivets? Did you use 3m tape? Any help is appreciated. I just got my front lip and rear diffuser.
https://www.amazon.com/dp/B07BD1G7KK?psc=1&ref=ppx_yo2ov_dt_b_product_details
https://www.amazon.com/dp/B0BFP8QLK9?psc=1&ref=ppx_yo2ov_dt_b_product_details
https://www.amazon.com/dp/B0CX5H1HFZ?ref=ppx_yo2ov_dt_b_product_details&th=1
The 2 corners by the wheels, i re-used the factory screws. I also used 2 rivets and 2 of these for the locations where the hardware above wouldn't work.
https://www.amazon.com/dp/B08XX4KV62?ref=ppx_yo2ov_dt_b_product_details&th=1
The install is pretty straight forward. Put the top 3 pieces together and then screw them to the bumper using the outermost holes. Then tape it to the bumper to make sure you are happy with the fitment.....then mark all the hole locations on the bumper for drill locations.
Jrc27 wroteI am all set!! Thank you 😊 got it installed with a buddy a few days later. Love it.I just installed mine yesterday. I didn't use any of the screws. I bought these and used them for all but 6 locations.
https://www.amazon.com/dp/B07BD1G7KK?psc=1&ref=ppx_yo2ov_dt_b_product_details
https://www.amazon.com/dp/B0BFP8QLK9?psc=1&ref=ppx_yo2ov_dt_b_product_details
https://www.amazon.com/dp/B0CX5H1HFZ?ref=ppx_yo2ov_dt_b_product_details&th=1
The 2 corners by the wheels, i re-used the factory screws. I also used 2 rivets and 2 of these for the locations where the hardware above wouldn't work.
https://www.amazon.com/dp/B08XX4KV62?ref=ppx_yo2ov_dt_b_product_details&th=1
The install is pretty straight forward. Put the top 3 pieces together and then screw them to the bumper using the outermost holes. Then tape it to the bumper to make sure you are happy with the fitment.....then mark all the hole locations on the bumper for drill locations.
Would those of you that installed this lip say it can be done with one individual? I don't think I would isntall with just 3m tape so I would def. want to use the body bolts/screws across the install. Anything to look out for while doing this install to avoid any irreversible damage?
starlights wroteDid you found Rear Diffuser for your Xline? Then please share the linkI bought the same one at Amazon for that price too. The price was low enough to justify experimenting if it would fit XLine - and it did!
https://www.amazon.com/dp/B0BWPSG4XW
Here is a quick cell phone image. I suspect that many brand name splitters are being sourced from the same manufacturer and sold at many times higher cost.
pkxohaib wroteI have a Msport... it can be found on Amazon or eBay.Did you found Rear Diffuser for your Xline? Then please share the link
pkxohaib wroteI never looked. If you want one, my advise is to get one and try. Most likely you will be able to make it fit as long as it’s a simpler design and not super expensive ( so you don’t end up wasting too much money).Did you found Rear Diffuser for your Xline? Then please share the link
Edit: additionally, I have a hitch so rear diffuser may not be a good idea, but if I find one cheap enough to experiment with, I may try some engineering;).
Bavar-ian wroteWhat wheels are those?They call this the "Black Knight" kit off Aliexpress/Taobao. Its in CF.
Rear diffuser cmpletely blocks the rear kick-to-open sensor so this would be the trade off.
https://www.amazon.com/dp/B0CJTWPXG9?psc=1&ref=ppx_yo2ov_dt_b_product_details
hitter07 wroteNot my X5, but I believe those are HRE FF10 Flowform wheels. I have a set on backorder (going on 3 months now). I'm loosing hope they will ever show up. To tide me over, I purchased a used set of 742s and debating on cancelling the HREs and just staying with the 742s.What wheels are those?
The ff10s do looks great though....we'll see
.
5ive7even wrotewhat sizes did you go with for the ff10?Not my X5, but I believe those are HRE FF10 Flowform wheels. I have a set on backorder (going on 3 months now). I'm loosing hope they will ever show up. To tide me over, I purchased a used set of 742s and debating on cancelling the HREs and just staying with the 742s.
The ff10s do looks great though....we'll see
