mamous wrote

Hello everyone,
I just want to share my second mod on this beast
Maxton Design Front Splitter V.2 😍

In the beginning I tried to have some ship install it for me and they quoted me about $700 for installation LOL
So I decided to installed it my self as I had some downtime on Sunday, first I tried using the bolts and nuts that came with it, but that would require me to disassemble the bumper as I tried to do that without but I couldn't, so few drinks and 115 degrees got me into what I call it Fk it mode 😅.
I tried using rivet nuts but none of the shops around me had any decent ones at least the ones that pop or trifold and make it look "professional" install, but the ones I used wouldn't hold it and they kept falling
Finally
I installed it using 3m tape and self tapping screws (about 20 screws).
Looks amazing from the front but if you ever find my car somewhere don't look underneath 🤣😂

beammeupscottie wrote

Looks good from that angle…can you upload more angles?

ipayincash wrote

Looks great man Maxton really coming through with the heat atm!

"Looks amazing from the front but if you ever find my car somewhere don't look underneath 🤣😂" HAHAHAHAHA we'll be sure not to peak lol I'm glad to see I'm not the only beginner level DIY'er starting to take on projects lol I did a few installs recently and working on a couple more, kept my arms and my legs, shops around my area want to charge more than double what a licensed therapist with a masters degree charges

mamous wrote

If anyone knows a good shop in Arizona please let me know ��

azm3 wrote

Ultimate Auto Works in Scottsdale is the best! Half the shop dedicated to racecars, half to maintenance and service.

Been using them since I got my first M3 20 years ago...


https://www.ultimateautoworks.com/

mamous wrote

Hello everyone,
I just want to share my second mod on this beast
Maxton Design Front Splitter V.2 😍

In the beginning I tried to have some ship install it for me and they quoted me about $700 for installation LOL
So I decided to installed it my self as I had some downtime on Sunday, first I tried using the bolts and nuts that came with it, but that would require me to disassemble the bumper as I tried to do that without but I couldn't, so few drinks and 115 degrees got me into what I call it Fk it mode 😅.
I tried using rivet nuts but none of the shops around me had any decent ones at least the ones that pop or trifold and make it look "professional" install, but the ones I used wouldn't hold it and they kept falling
Finally
I installed it using 3m tape and self tapping screws (about 20 screws).
Looks amazing from the front but if you ever find my car somewhere don't look underneath 🤣😂

JDE92M3 wrote

Great choice! I did the fill Maxton kit on my pre LCI and I love it too. Consider adding the rear it makes the car look like a wide body haha.

JD

mamous wrote

I have the rear splitter in my garage, just waiting to have some downtime from work to install it, any tips or suggestions for installing it? This time I'm going directly with 3m tape and self tapping screws so I don't waste time lol

mamous wrote

I have the rear splitter in my garage, just waiting to have some downtime from work to install it, any tips or suggestions for installing it? This time I'm going directly with 3m tape and self tapping screws so I don't waste time lol

JDE92M3 wrote

Great choice! I did the fill Maxton kit on my pre LCI and I love it too. Consider adding the rear it makes the car look like a wide body haha.

JD

azm3 wrote

Looks great!

Those skirts look like they drop pretty far down. How much clearance do you have from the bottom of the skirts to the ground?

mamous wrote

Here you go Sir, apologize for the delay

JDE92M3 wrote

Great choice! I did the fill Maxton kit on my pre LCI and I love it too. Consider adding the rear it makes the car look like a wide body haha.

JD

JDE92M3 wrote

Great choice! I did the fill Maxton kit on my pre LCI and I love it too. Consider adding the rear it makes the car look like a wide body haha.

JD

S68 X5MC wrote

Has anyone install this lip on a Marina Bay Blue LCI F95 yet? I'm back and forth on this once again. 😆

Edit: Where can I buy this other than the Maxton site. They want the same amount for shipping which is a load of crap.

I just put this same lip on Brooklyn Grey. Looks really good imo.

I saw the crazy pricing on shipping too from the US site. Go to their UK store. It was $370ish all in with shipping. It was very quick to get here too. Less than 1 week to the east coast.

dpie wrote

S68 X5MC wrote

Has anyone install this lip on a Marina Bay Blue LCI F95 yet? I'm back and forth on this once again. 😆

Edit: Where can I buy this other than the Maxton site. They want the same amount for shipping which is a load of crap.

I just put this same lip on Brooklyn Grey. Looks really good imo.

I saw the crazy pricing on shipping too from the US site. Go to their UK store. It was $370ish all in with shipping. It was very quick to get here too. Less than 1 week to the east coast.

$366 with shipping to Florida using Paypal. Much better.