225.1KVIEWS
429REPLIES
94APPRECIATES
95ACTIVE PEOPLE
05-11-2026LAST POST
ring0r wroteCan you share photo of IDrive menu?I have managed that in the IDrive menu the daytime running light for the taillights is displayed but unfortunately I can not activate it, is there still a control unit which must be coded?
Almaretto wroteAfter the coding in the HU_MGT this menu appears but unfortunately I can not activate the taillights as DRLCan you share photo of IDrive menu?
ring0r wroteWhen you cannot select the checkbox, you are missing a setting in another module. I think of HU_MGU as holding the toggle for a setting that is usually enabled in other modules. If the other module has it disabled, you get a non-functional checkbox.After the coding in the HU_MGT this menu appears but unfortunately I can not activate the taillights as DRL
My guess is it is in AAG.
jokinawa wroteThank you for your answer. Unfortunately, there is probably no AAG controller in the G20 but I have found the 3 latter points in the BDC and coded unfortunately without success. The point with the TFL Active is unfortunately missing entirelyWhen you cannot select the checkbox, you are missing a setting in another module. I think of HU_MGU as holding the toggle for a setting that is usually enabled in other modules. If the other module has it disabled, you get a non-functional checkbox.
My guess is it is in AAG.
jokinawa wroteAAG is trailer hitch module.When you cannot select the checkbox, you are missing a setting in another module. I think of HU_MGU as holding the toggle for a setting that is usually enabled in other modules. If the other module has it disabled, you get a non-functional checkbox.
My guess is it is in AAG.
May want to search tagfahrlicht as well.
jokinawa wroteI must be missing something obvious - how do I download the xml file? Do you have to have a GitHub account?Hi All,
I have developed some cheat codes for my G07 which should work for G05 for the most part.
If someone is willing to test and get back to me that would be great.
Here is a link to the post.
[CODING] G07 E-Sys Cheat Codes https://g07.bimmerpost.com/forums/showthread.php?t=1636904
And a link to the cheat codes:
https://github.com/packetpilot/bmw-f/blob/master/cheats/jokinawa.xml
I am still working on them and will have some updates soon. Cheers!
spike5150 wroteNo account needed unless you want to contribute.I must be missing something obvious - how do I download the xml file? Do you have to have a GitHub account?
There are multiple ways. Here are two:
1. Download zip. https://github.com/packetpilot/bmw-f
a. Extract bmw-f-master.zip
d. Grab xml from cheats folder
2. Go to cheat page: https://github.com/packetpilot/bmw-f/blob/master/cheats/jokinawa.xml
a. Copy lines 1 through end
b. If already have xml and updating, replace text and save
c. If starting new, open text document --> paste --> save as xml.
My G05 i-step will be updated next week, after which I plan to try these codes and will be able to confirm which ones works
Do we have the cheat codes that enable closing the trunk from the key fob ?
jokinawa wroteHi All,
I have developed some cheat codes for my G07 which should work for G05 for the most part.
If someone is willing to test and get back to me that would be great.
Here is a link to the post.
[CODING] G07 E-Sys Cheat Codes https://g07.bimmerpost.com/forums/showthread.php?t=1636904
And a link to the cheat codes:
https://github.com/packetpilot/bmw-f/blob/master/cheats/jokinawa.xml
I am still working on them and will have some updates soon. Cheers!
I will try to get this updated by Friday.
Nice to meet you.
It is on G05 and is coding with reference to jokinawa.xml.
The following parameters cannot be set.
・ Change played sound signal set to Rolls Royce
BRAND >> rolls_royce
・ Change Startup Emblem to Alpina
STARTUP_EMBLEM >> alpina
“BRAND” did not change even when “01-09” was set.
“STARTUP_EMBLEM” has changed to “01: M”
“ALPINA” could not be found.
I tried to set "01-09" here, but there was no change.
The list to select for both is "UnKnown".
Please Tel me.
anuj452 wroteI have added a pull request to add that option among other things.This is helpful ...
My G05 i-step will be updated next week, after which I plan to try these codes and will be able to confirm which ones works
Do we have the cheat codes that enable closing the trunk from the key fob ?
https://github.com/packetpilot/bmw-f/blob/93efa128d8ac40c822a6eb633f883bf0c06ba835/cheats/jokinawa.xml
masaru wroteYes, the BRAND does not currently work on my i-step of 2019/03.xx. I do not have a newer one to test right now.Dear. jokinawa
Nice to meet you.
It is on G05 and is coding with reference to jokinawa.xml.
The following parameters cannot be set.
・ Change played sound signal set to Rolls Royce
BRAND >> rolls_royce
・ Change Startup Emblem to Alpina
STARTUP_EMBLEM >> alpina
“BRAND” did not change even when “01-09” was set.
“STARTUP_EMBLEM” has changed to “01: M”
“ALPINA” could not be found.
I tried to set "01-09" here, but there was no change.
The list to select for both is "UnKnown".
Please Tel me.
I had STARTUP_EMBLEM work for Alpina once with the Alpina animation, but it only seems to do it at certain times.
I have added a pull request on the main repository to point out the BRAND issue.
jokinawa wroteThax YouYes, the BRAND does not currently work on my i-step of 2019/03.xx. I do not have a newer one to test right now.
I had STARTUP_EMBLEM work for Alpina once with the Alpina animation, but it only seems to do it at certain times.
I have added a pull request on the main repository to point out the BRAND issue.
Oh really. . .
If you find any new information, please let me know.
i was able to setup my E-sys over the weekend and successfully coded few options on my G05
1. Disable Legal disclaimers at startup and 3d view
2. Able to see temp and pressure for the tires
3. Close trunk with the keyfob
jokinawa wroteI have added a pull request to add that option among other things.
https://github.com/packetpilot/bmw-f/blob/93efa128d8ac40c822a6eb633f883bf0c06ba835/cheats/jokinawa.xml
jokinawa, 
eaglesrest, and everyone that came before them ... and being ultimately blessed by TokenMaster (until 2022) ... I am now in the E-Sys / LauncherPro coding club as well.Coded my first function using E-Sys: default Sport Individual driving mode, using
jokinawa's cheat code file from GitHub. Seems to work! Pretty sure that code (just one parameter) is a good "Hello World!" equivalent found in the software world :-).The machine and software setup was a bit of a beast due mainly to LauncherPro uncertainty (the uncertainty wouldn't be a big issue for someone who has gone through the process before, but on a first pass, you don't know what is your fault and what isn't). And there is clearly lots and lots still to learn (coding using someone else's cheat code is junior coding competency level result).
Noting a few bugs that complicated things. Specifically, in E-Sys, many buttons and windows are cut off making it difficult to read their functions (e.g. "Code NCD" button on my setup says only "Code N..."). Also, TokenMaster's NCD CAFD Tool v0.5.2, would be useful for NCD file compares, has trouble reading some NCD files, such as the BODY3 ECU file used to code above default driving mode. But these are very 1st world problems :-).
Not in front of my PC but try right clicking Esys.exe and change compat option for high DPI.
Sounds like you have the high res issue.
Ncd tool is pretty much useless with later istep, except for fa stuff
